Magnetic Cleaner

Magnetic Cleaner.When a central heating system has been in place for a long time, then it is reasonable to expect that it will at some stage experience or has experienced the symptoms of scale in the pipework. There has to be a way to clear this problem otherwise the system will grind to a halt as the pipes clog with scale, rust and corrosion. The magnetic water cleaner is a good idea for you and is something that you can fit in on your pipework quite easily. Hard water is the cause usually of scale formation as it contains high concentrations of minerals. These are largely Magnesium and Calcium. Hard water is not bad for you but rather for your plumbing pipework. The affects are scale in dishwashers, taps and shower-heads leading to a reduction in flow. It may also reduce the suds created by your soap. Lots companies now make and supply magnetic cleaners for central heating systems. Barnet Plumbers fit magnetic cleaner units. The Magnetic Cleaner:Functions by allowing water to flow through a strong magnetic field which changes the structure of the deposits in the water, making them less likely to stick to the inner walls of the pipework. This way of operation does not make the hard water any softer.Fitting:Isolate and drain the heating system. Locate an accessible position on the pipework to connect the cleaner, normally close to the boiler. Always read and work to the manufacturers instructions, they are quite easy to understand. If you are not confident to do this yourself you can always call a professional like a Barnet Plumber who understands magnetic cleaning systems. The magnets would normally clamp around the pipework. They are not fed by any mains electrical supply. Now the magnets are fitted to the system you will need to fill the heating system once more.